Filter
Top Products
NETGEAR Wireless-N 300 Router WNR2000 User Manual
5-12 Fine-Tuning Your Network
v1.3, July 2009
5. Click Add. the Port Triggering–Services screen displays.
6. In the Service Name field, enter a descriptive service name.
7. In the Service User field, select Any (the default) to allow this service to be used by any
computer on the Internet. Otherwise, select Single address, and enter the IP address of one
computer to restrict the service to a particular computer.
8. Select the service type, either TCP or UDP.
9. In the Triggering Port field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
10. Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
Figure 5-5