Filter
Top Products
Advanced Settings
106
N300 Wireless Router WNR2000v4
Portmap Table also displays what type of port is open and whether that port is still active
for each IP address.
6. (Optional) To refresh the information in the UPnP Portmap Table, click the Refresh button.
IPv6
You can use this feature to set up an IPv6 Internet connection type if NETGEAR genie does
not detect it automatically.
To set up an IPv6 Internet connection type:
1. Select Advanced >
Advanced Setup > IPv6.
The IPv6 screen displays:
2. Select the IPv6 connection type from the list. Your Internet service provider (ISP) can
provide this information.
• If your ISP did not provide details, you can select 6to4 T
unnel.
• If you are not sure what type of IPv6 connection the router uses, select Auto Detect
so that the router detects the IPv6 type that is in use.
• If your Internet connection does not use PPPoE, DHCP
, a fixed IP address, or
pass-through but is IPv6, select Auto Config.