Filter
Top Products
User Manual for the NETGEAR RangeMax™ Wireless PC Card WPN511
C onfiguration 4-3
February 2005
b. Click the WPN511 icon in the Windows system tray to open the Smart Wizard
Wireless Assistant.
c. The Settings tab displays as shown below.
Figure 4-2: Smart Wizard Wireless Assistant Settings tab page
2. Configure the wireless Network settings.
a. In the Network Type section, be sure that Infrastructure is selected.
b. Enter the SSID. This is also called the Wireless Network Name.
Note: You will not get a wireless network connection unless the network SSID matches
exactly what is configured in the access point.
Tip: You can click the Network tab to view a list of the available wireless networks and
their SSIDs at the location where you are.
3. Save your settings in a Profile.
a.
Type a descriptive name for the Profile in the “Profiles” field.
b. Click Save Profile.
All the configuration settings are saved in this profile.
c. Click Apply.
d. Click Close to exit the configuration utility or Cancel to return to the previous settings