Filter
Top Products
Reference Manual for the NETGEAR RangeMax™ Wireless Access Point WPN802
3-6 Basic Installation and Configuration
202-10101-01, 4 May 2005
• Secondary DNS Server: The Access Point will use this IP address as the secondary
Domain Name Server used by stations on your LAN.
• Time Zone: Select the appropriate local time zone for your Access Point from a list of all
available time zones. The default is GMT.
Next, Configure the Wireless Settings
After you configure the Basic Settings for the WPN802, then you need to configure the Wireless
Settings.
1. On the Settings page, click Wireless Settings. The Wireless Settings menu appears:
Figure 3-4: Wireless Settings menu
2. Enter the wireless settings. For more information, see “Understanding Wireless Settings” on
page 4-2.
3. Test the wireless connectivity. To do this, use a computer with a wireless adapter that is
configured according to the wireless settings you just set in the WPN802. With this computer,
establish a wireless connection to the WPN802.
Now that you have finished the setup steps, you are ready to deploy the WPN802 in your
network. If needed, you can now reconfigure the PC you used in step 1 back to its original
TCP/IP settings.