Filter
Top Products
Management and Information 5-1
202-10101-01, May 2005
Chapter 5
Management and Information
This chapter describes how to use the management and information features of your NETGEAR
RangeMax™ Wireless Access Point WPN802. These features can be found under the
Management heading and Information heading in the main menu of the browser interface.
Changing the Password
The default password for the WPN802 is password. NETGEAR recommends that you change this
password to a more secure password.
To change this, click the Change Password link. The Change Password dialog box opens.
Figure 5-1: Change Password dialog box
To change the password, first enter the old password, then enter the new password twice. You can
also restore the default password. Click Apply to save your changes.
Note: Before changing the WPN802 password, use the backup utility to save your
configuration settings. If after changing the password, you forget the new password you
assigned, you will have to reset the WPN802 back to the factory defaults to be able to log
in using the default password of password. This means you will have to restore all the
WPN802 configuration settings. If you ever have to reset the WPN802 back to the
factory defaults, you can restore your settings from the backup.