Filter
Top Products
ASI-IP-GTW User's Manual
Page 43
Resulting total rate: This is the resulting total IP bitrate including FEC
overhead for this channel. The Status frame contains status
parameters related to the FEC setting.
Column UDP port: This parameter is the UDP port used for the column
FEC data. The value is always Media UDP port + 2 which is in
accordance with Pro-MPEG CoP 3.
Row UDP port: This parameter is the UDP port used for the row FEC
data. The value is always Media UDP port + 4 which is in accordance
with Pro-MPEG CoP 3.
Data rate: This parameter shows the IP data rate for this channel
excluding FEC data.
Column FEC rate: This parameter shows the IP data rate for the column
FEC data of this channel.
Row FEC rate: This parameter shows the IP data rate for the row FEC
data of this channel.
In order to make it possible to demonstrate the function of the FEC
engine, ASI-IP-GTW provides a mode to drop IP packets on the
transmitter.
Frame drop: Enter the percentage of packets to be dropped from this
channel. This value is not stored in the unit and must be entered after
each power on.
Frames dropped: This counter shows the number of frames discarded
at the output of the unit.