Filter
Top Products
ASI-IP-GTW User's Manual
Page 44
3.6.3 Ethernet Settings
Figure 18. The Ethernet page of an IP transmitter
3.6.3.1 VLAN settings
By enabling VLAN tagging, IEEE802.1Q VLAN tags will be added to the
outgoing streams. In effect, the video data Ethernet port will act as an
802.1Q VLAN trunk.
Enable VLAN tagging: Check this box to enable VLAN tagging.
VLAN ID: Enter VLAN ID in this field. This value shall be between 1 and
4094.
VLAN Priority: Enter VLAN priority in this field. This value shall be
between 0 and 7.
3.6.3.2 Static MAC setting
Static MAC destinations address is used to specify a fixed MAC
destination address in outgoing streams. This makes it possible to
transmit to a destination host over a one-way link. The static MAC
address setting then replaces the normal ARP lookup.
Enable static MAC: Check this box to enable insertion of the static MAC
address.
Static MAC: Enter the destination MAC address.