Filter
Top Products
ASI-IP-GTW User's Manual
Page 45
3.6.4 Ping Settings
Figure 19. The Ping page of an IP transmitter
To resolve network problems, avoiding flooding, were the receiver or
specific network components on the way to the receiver time out on
there MAC address lookup. This feature solves this by pushing through
a ping message regularly. This feature makes it also possible for the
sender to know if there is an active recipient, or if it is down at the
moment.
Enable Unicast Peer Ping: Check this box to enable regular pinging of
the peer, e.g. the receiver of the stream. This will only have effect in
unicast mode.
Interval: Set the interval in seconds between each Ping.
Active: Indicates if the channel is actively sending Ping.
OK responses: Indicates how many valid Ping responses have bean
received.
Timeouts: Indicates how many of the sent Ping messages timed out,
without receiving a valid response.