Filter
Top Products
NTI SERIMUX SERIES CONSOLE SWITCH
22
From the "User main menu" the following functions are possible:
Function Keystroke
Connect to host port [1]-[xx]-[Enter]
(where xx is the port index number)
Display Accessible host list [2]-[Enter]
Display accessible host and user
ports and info about each
[3]-[Enter]
Login as administrator [4]-[Enter]
(only works if user has administrative rights)
Logout [0] then [Y] to confirm
Refresh the screen [Spacebar]
A user can only connect to the hosts the user has been allowed access to by the administrator. Press [2] to display a list of
accessible hosts.
Port List screen
From the "User main menu", press [3] to display the list of user accessible ports and information about these ports. Only the
administrator can change the communication settings.
Figure 19- A limited user accessible Port list
On consecutive columns, the following are displayed:
Column Description
Port index number of the port
Port Name Name assigned to the port
Usr/Hst Port type, user or host
Modem Yes if modem is attached, - if not
BaudRate Receiving and transmitting speed of the port
Serial Character size, parity, and stop bit number
Flow Defines flow control method
• Hard (RTS/CTS or outband)
• Soft (Xon/Xoff or inband)
• Both
• None
Xon/Xoff Characters used for Xon and Xoff flow control
Discon In-band disconnect sequence (1-3 characters, or none)
Press [R] to refresh and re-display the
information on the screen.
If the number of user accessible ports is
greater than 17,
press [N] to see the next page,
press [P] to see the first page.
Press [Esc] or [Space] to return to the
"User main menu".