Filter
Top Products
NTI SERIMUX SERIES CONSOLE SWITCH
26
¾ Login user to a port and connect the user port to a host port
Action (from Keypad) Reaction of SERIMUX
1. Press USER - The LED “User” will illuminate.
- The port 0 LED will be illuminated, the other port LEDs will be OFF.
2. Enter the user number - The corresponding port LED will illuminate
3. Press PORT - The LED "Port" will illuminate
4. Enter the user port
number
- The corresponding port LED will illuminate. The other port LEDs will be OFF.
5. Press PORT again - The LED "Port" will illuminate
6. Enter the host port
number
- The corresponding port LED will illuminate. The other port LEDs will be OFF.
7. Press ENTER - The User main menu will be displayed on the terminal application on the user port: (see Fig.
18 on page 21 )
- The administrator port (if connected) and the data traffic of any linked ports will be indicated
by illuminating and flashing corresponding port LEDs respectively.
The user will be connected if:
– the specified user is enabled, and is not logged in;
– the specified ports are accessible to the user;
– the user port is not connected and the port type is “User”.
– the host port is not connected and the port type is “Host”.
¾ Disconnect and logout a user
Action (from Keypad) Reaction of SERIMUX
1. Press DISCON - The LED “Discon” will illuminate.
2. Press USER - The LED “User” will illuminate.
3. Enter the user number - The corresponding port LED will illuminate, the other port LEDs will be OFF
4. Press ENTER - The LEDs “Port", “Admin”, "User", and "Dison" will illuminate briefly.
¾ Connect 2 host ports
Action (from Keypad) Reaction of SERIMUX
1. Press PORT - The LED “Port” will illuminate.
- The port 0 LED will be illuminated. The other port LEDs will be OFF.
2. Enter the first port number - The corresponding port LED will illuminate, the other port LEDs will be OFF
3. Press PORT again - The LED “Port” will illuminate. The port 0 LED will be illuminated, the other port LEDs will
be OFF.
4. Enter the second port
number (to connect the
first port number to)
- The corresponding port LED will illuminate. The other port LEDs will be OFF.
5. Press ENTER - The administrator port and the data traffic between linked ports (if any) will be indicated by
the corresponding LEDs.
The two host ports will be connected if:
– the ports are not connected
– the ports type is “Host”.