Network Technologies Console Switch Switch User Manual


 
NTI SERIMUX SERIES CONSOLE SWITCH
3
FEATURES AND FUNCTIONS
1. PWR LED- LED will illuminate to indicate the SERIMUX is ON
2. Port LEDs- LEDs will illuminate to indicate active administrator port and data traffic; also used to indicate port or user number
when entering commands from the keypad.
3. Command LEDs- LEDs will illuminate to indicate functions being performed
4. Keypad- for manual control of switch functions
5. Port connectors- RJ45 female serial connectors- for connecting serial cables from Terminals or CPUs
6. Console Port- RJ45 female serial connector- for connecting serial cable from a terminal console
7. Reset button- to manually reset SERIMUX firmware to factory default settings
8. Power Switch- for turning the SERIMUX ON or OFF
9. 12VDC 2A- connection jack for the AC adapter (acceptable operating voltage is 9-12VDC)
PWR
1
0246
35
8
7
10
9
12
11
14
13
16
15 Port Admin User Discon
ESC
ADMIN USER
PORT 6
12345ENTER
DISCON7890
12VDC
2A
-
+
NTI
NETWORK
TECHNOLOGIES
INCO RPORATE D
Tel :330-5 62-70701275 Danner Dr
Aurora, OH 44202
www.nti1.com
RESET
CONSOLE
NTI
R
Network Technologies Inc
Rear View of SERIMUX
Front View of SERIMUX
2 3
41
5 798
9101112
13
141516
123
4
5678
6
SERIMUX
R