Filter
Top Products
9
Once logged-in, follow the instructions on page 10 for setting up users and changing the password. Once the password is setup,
if it is lost or forgotten the administrator will have to contact NTI for assistance on clearing the password and set it up again. The
administrator can setup each of the users and the limitations of their use of the individual CPUs within the Administration Mode.
When a standard user powers up the system a security screen may appear as setup by the administrator. The user will
need to login to the system by following the instructions below for the USER LOGIN. If the user does not know the appropriate
user name and password (setup by the administrator), contact the system administrator for this information. Once logged-in a
user can follow the Command Mode functions described on page 12 to control the system of CPUs within the limitations as
determined by the administrator.
User Login Mode
User Login Mode requires a user to login with a user name and password from the list created by the administrator. With security
enabled, the user will be locked to the current CPU and the login screen will remain on the monitor until the user logs in.
Function: Keystroke:
Add a character to the
user name/password
Remove previous character
from the user name/password
Submit user name/password
Exit USER LOGIN and return
to previous mode. This function
is only available if security is
not currently enabled.
ADDITIONAL OSD MODES AVAILABLE WITH SECURITY
Administration Mode
To enter the Administration Mode: press <A> from the Maintenance Mode menu. (See page 17 for Maintenance Mode menu.)
The Administration Mode (see Fig. 5) can be accessed only when security features are activated and the administrator is logged-
in. Users other than the administrator are not allowed to enter the Administration Mode.
If a different user is logged-in, log-out by pressing <Q> from the Maintenance
Mode menu, then log-in as
Administrator. (See page 8, "Enabling The
Security Feature".)
Administration Mode allows the administrator to use the following functions:
Function: Keystroke:
Change the administrator’s
password
Disable security
Enter User Name List Mode
Figure 5- Administration Mode menu
Selects the idle time in minutes
Change Alternate Command
(See page 12 for details)
Hot Key
Exit Administration Mode and
return to previous mode
Esc
Enter
Backspace
If the password submitted is incorrect, the user will not be
able to proceed.
If the password submitted is correct, the user will proceed
to Normal Mode.
Esc
S
C
U
T
-
-
(xxx from 002 to 255. ie. t002
would set the time out period
for 2 minutes. 000 will disable it. )
-
(0-2)
x
(0-9)
x
(0-9)
x
Shift
or
A-Z
(Type any upper or lower case
alphabetical or numeric character)
+
A-Z
0-9
ADDITIONAL MODES AVAILABLE WITH SECURITY
X