Filter
Top Products
14
I
NFRARED MAIN SYSTEM UNIT
Extending the Cable
If you must extend the cable from the wall adapter to the
MSU250’s status input jack be sure to maintain correct polari-
ty. The tip of the plug should be positive (+) and the sleeve
negative (-). Any 16 gauge 2-conductor cable can be used to
extend the power status cable up to 200'.
Checking the Power Supply
It is possible to check the status power supply itself and any
connections that were made to extend the cable by inserting
the status plug into the Power jack on the MSU250. If the
Power LED lights the status power supply and connections are
ok. If the Power LED does not light check all connections and
replace the power supply if necessary. For more details on
incorporating the IntelliPad please refer to the IntelliPad’s
users manual.
DS00328ACN_MSU250.qxp 2/27/04 10:10 AM Page 14