Filter
Top Products
20
I
NFRARED MAIN SYSTEM UNIT
Addendum: Using the MSU250 with the IntelliControl
®
automation system
3-30V
AC/DC
STATUS
IN
150 OHm
Resistor
Using the MSU250 with the IntelliControl Home
Theater automation system
When connecting an MSU flasher output to an IntelliControl
“Home Theater” port, a 150-Ohm resistor must be placed
between the data and the ground line of the IntelliControl IR
sensor input (see figure above). No resistor is needed if the
MSU is being connected to the ”2nd Zone” port of the
IntelliControl.
DS00328ACN_MSU250.qxp 2/27/04 10:10 AM Page 20