Filter
Top Products
11
❿ Use the SELECT ▼ button to select
[CLIENT CERTIFICATE] and press the
ENTER button.
A list of files (thumbnail screen) will be dis-
played.
• For operating the thumbnail screen, see “5.
Using the Viewer” in the “User’s Manual”
(PDF).
• To return to the [AUTHENTICATION] page,
press the EXIT button.
NOTE:
Installing a digital certicate
You can install each digital certicate (client certicate and CA certicate) for [PROFILE 1 (or
)] on a le-by-le basis.
• Install a root CA certicate for a CA certicate.
• If you install a digital certicate over your existing digital certicate, the existing digital cer-
ticate will be overwritten with the new digital certicate.
• Once a digital certicate has been installed, its information cannot be deleted even if you
stop setting WPA-EAP or WPA-EAP.
⓫ On the thumbnail screen, select a
digital certicate (PKCS#12 format le)
saved in your USB memory device and
press the ENTER button.
The password screen will be displayed.
⓬ Select [PASSWORD] eld and press the
ENTER button.
The character entry screen (software keyboard)
will be displayed. Set the password of the pri-
vate key. A password must be 1 character or
more and 3 characters or less.
The selected digital certificate file will be in-
stalled on the projector.
• When the root CA certicate is not included in
the le that was selected in Step ⓫, proceed
to Step ⓭. When the root certication author-
ity certicate is included, proceed to Step ⓯.
① Select a USB memory and
press the ENTER button.
②
Highlight a digital certificate
and press the ENTER button.