1
⓭ Use the SELECT ▼ button to select [CA
CERTIFICATE] and press the ENTER
button.
A list of files (thumbnail screen) will be dis-
played.
⓮ On the thumbnail screen, select a digi-
tal certicate (DER format le) saved in
your USB memory device and press the
ENTER button.
• Select your root CA certicate here.
The selected digital certicate will be installed
on the projector.
⓯ After completing required settings, use
the SELECT ▼ button to select [OK] and
press the ENTER button.
The [WIRELESS] page will be returned.
⓰ Use the SELECT ▼ button to select [RE-
CONNECT] and press the ENTER but-
ton.
⓱ Use the SELECT ▼ button to select [OK]
and press the ENTER button.
This will complete setting [EAP-TLS] for
[EAP TYPE] in [WPA-EAP] or [WPA2-EAP].
HINT:
Clearing the digital certicate that is installed on the projector
To clear the digital certicate installed on the projector, follow the steps below.
By doing the following procedure, all the digital certicates for the currently displayed prole
will be cleared.
❶ Select [CLEAR CERTIFICATES] in the bot-
tom left of the [ADVANCED SETTINGS]
screen and press the ENTER button.
A message for conrmation will be displayed.
❷ Select [YES] and press the ENTER button.
The digital certicates will be cleared.