➏ Use the SELECT ▼▲ button to select
a connecting SSID, and then press the
SELECT ▶ button to select [OK].
Finally press the ENTER button.
• Select the SSID for which WPA-PSK or
WPA-PSK is set.
• Select [INFRASTRUCTURE ( )] for [NET-
WORK TYPE]. WPA-PSK, WPA-PSK,
WPA-EAP, or WPA-EAP is not available
when [AD HOC ( )] is selected.
➐ Use the SELECT ▲ button to select the
[CONNECTION] tab and then SELECT ▶
button to select the [SECURITY] tab.
The [SECURITY] page will be displayed.
➑ Use the SELECT ▼ button to select the
[SECURITY TYPE] eld and press the
ENTER button.
The pull-down list will be displayed.
➒ Use the SELECT ▼▲ button to select
[WPA-PSK] or [WPA2-PSK] and press
the ENTER button.
❿ Use the SELECT ▼ button to select the
[TKIP/AES] eld and press the ENTER
button.
The pull-down list will be displayed.
⓫ Use the SELECT ▼▲ button to select
[TKIP] or [AES] and press the ENTER
button.
Select [TKIP] or [AES] according to the setting
for your access point.