Filter
Top Products
Index
Index-3Nortel Networks 5399 Access Switch Hardware Installation Guide
for a module 4-17
printer port test 3-21
product support xvii
publications
hard copy xvii
R
RARP protocol 2-23
Remote Access Concentrator
description of 1-3
dimensions of 1-12
electrical specifications of 1-12
EMI requirements 1-13
environmental conditions 1-12
firmware 1-5
flash memory 1-3
module processors 1-3
physical characteristics of 1-12
ROM monitor 1-5
safety requirements 1-13
server parameters 2-18
remote network access
review of 1-2
removing a module, procedures for 4-21
removing modem cards B-5
replacing a module, conditions for 4-17
resetting the Remote Access Concentrator 2-19
ROM Monitor
command descriptions 3-2
command syntax 3-1
commands 3-1
description of 1-5
list of commands 3-2
ROM monitor
commands 3-2
using 2-17
S
safety requirements 1-13
segment banks 1-4
segment selection DIP switch
setting the 2-5
self-booting the RAC 2-31
sequence command 3-3, 3-22
examples 3-22
serial line ports test 3-21
server parameters
for Remote Access Concentrator 2-18
service port
connecting a terminal to 2-14
module management through 1-5
pin assignments 2-14
terminal attributes 2-14
terminal settings 2-14
service port management 1-5
service port terminal
location of 2-14
setting
boot sequence 3-22
broadcast address 3-6
Internet address 3-6
IP encapsulation 3-7
load/dump gateway address 3-6
preferred load host address 3-6
service port terminal 2-14
subnet mask 3-6
Slot Selection menu
displaying the 2-15, 2-20
software installation
executing boot command 2-33
setting initial boot parameters 2-33
setting Internet address 2-33
stats command 3-24
example 3-24
fields 3-24
subnet mask
description 2-18
setting the 3-6
supervisory module
functional role 1-4
support, NortelNetworks xvii
supported configurations 1-6
System 5000 Hub
installing the module into 2-6
Slot Selection menu 2-15