Filter
Top Products
2-13
Chapter 2 Installing the Model 5399 Remote Access Concentrator Module
Nortel Networks 5399 Access Switch Hardware Installation Guide
1. Plug the cable into the WAN Interface port located on the
front panel of the Remote Access Concentrator (Figure 2-6
).
When the connector clicks into place, the connection is secure.
Port Pins and Signals
on page A-1 describes the WAN Interface
port’s signal/pin allocation.
Figure 2-6. Connecting a WAN Interface
For T1 applications, the Remote Access Concentrator
utilizes an internal Channel Service Unit (CSU). An
internal CSU is not used in E1 applications.