Filter
Top Products
3-11
Chapter 3 ROM Monitor Commands
Nortel Networks 5399 Access Switch Hardware Installation Guide
The next example shows a boot using tftp.TheRemoteAccess
Concentrator always tries to open a file using bfs first. If unsuccessful,
the Remote Access Concentrator uses tftp to open the file.
The next example shows a self boot.
monitor:: boot
Enter boot file name [(ip) “oper.64.enet”, \
(mop) “OPER_64_ENET.SYS”]::
Waiting for CMB Config Block Info...
Requesting default boot file “OPER_64_ENET.SYS” for MOP/VMS\
loads and “oper.64.enet” for all other protocols.
Unanswered requests shown as ‘?’,transmission errors as ‘*’.
Requesting boot from 192.9.200.88 via Ethernet...
Booting BFS file using open delay of 8
?
Booting TFTP file using open delay of 8
Booting TFTP file from 192.9.200.88
Header received OK. Received data blocks shown as ’.’.
................................
................?...............
................................
....*...........................
.*...................?..........
................EOF
monitor:: boot
Waiting for CMB Config Block Info...
Requesting default boot file “OPER_64_ENET.SYS” for MOP/VMS\
loads and “oper.64.enet” for all other protocols.Unanswered
requests shown as ‘?’,transmission errors as ‘*’.
Booting file: “OPER_64_ENET.SYS” from SELF
Loading image from SELF ...
.............................................................
Load Completed