Filter
Top Products
3-3
Chapter 3 ROM Monitor Commands
Nortel Networks 5399 Access Switch Hardware Installation Guide
Table 3-1. ROM Monitor Commands (continued)
Command Description Use
config Displays the current
hardware configuration
and revision levels.
Identifying your
hardware, memory, and
ROM versions.
erase Erases non-volatile
memory.
Clearing out old
parameters.
help Displays the list of ROM
Monitor commands.
Referencing the ROM
monitor commands.
image [-d | <file>] Displays and/or sets the
load image and tftp load
dump names.
Loadinganimagethat
differs from the default.
lat_key [-d] Sets the LAT key. Connecting to a DEC
VMS host.
net Executes an Ethernet
transceiver loopback
test.
Checking your Ethernet
connection.
ping Sends ICMP
ECHO_REQUEST
datagram to a host or
gateway.
Checking to see if a host
or gateway can be
reached.
ports [-d] Shows the current status
of a WAN interface port.
Testing a WAN interface
port or modem hardware.
sequence [-d |
<list>]
Displays and edits the
load/dump interface list.
Checking or changing
the load/dump interface
list.
stats Displayscurrentnetwork
statistics gathered by the
ROM.
Checking the network
resources.