Filter
Top Products
Starting L2TP
303532-A Rev 00
2-3
Preparing a Configuration File
Before starting L2TP, you must create and save a configuration file with at least
one WAN interface, for example, a synchronous or MCT1 port.
For information about the Site Manager configuration tool and how to work with
configuration files, see Configuring and Managing Routers with Site Manager.
To open the configuration file, complete the following tasks:
From the Configuration Manager window, go to one of the following sections to
enable L2TP:
Note:
L2TP is not compatible with dial services. Do not enable L2TP on the
same slot that you enable for a dial service, such as dial-on-demand, dial
backup, or bandwidth-on-demand.
Site Manager Procedure
You do this System responds
1. In the main Site Manager window, choose
Tools
.
The Tools menu opens.
2. Choose
Configuration Manager
. The Configuration Manager window
opens.
3. Choose
Local File
,
Remote File
, or
Dynamic
.
Site Manager prompts you for the
configuration file you want to open.
4. Select the file and click on
OK
. The Configuration Manager window
opens, displaying the router modules.
Section Page
Enabling L2TP on an Unconfigured WAN Interface
2-4
Enabling L2TP on an Existing PPP Interface 2-5
Enabling L2TP on an Existing Frame Relay Interface 2-7
Enabling L2TP on an Existing ATM Interface 2-9