Filter
Top Products
Configuring L2TP Services
B-6
303532-A Rev 00
Configuring the Dial-on-Demand Circuit
Modify the dial-on-demand circuit configuration for the AN routers as follows:
1.
In the Configuration Manager window, choose Dialup > Demand Circuits
> Demand Pools > PPP Circuits > PPP Demand Circuits to display the
PPP Demand Circuits window.
2.
Disable outbound authentication.
3.
Enable RIP on the dial-on-demand circuit.
4.
Configure default or static routes for the PC LAN to the L2TP IP
interface.
For more information about dial-on-demand, see Configuring Dial Services.
Configuring the PPP Interface
Modify the PPP interface configuration for the AN routers as follows:
1.
In the Configuration Manager window, choose Protocols > PPP >
Interfaces to display the PPP Interface List window.
2.
Select the PPP interface to the ISP network.
3.
Click on Lines to display the PPP Line List window.
4.
Enable RFC 1661 compliance.
For more information about PPP, see Configuring PPP Services.
Parameter Name Value
Outbound Authentication Disable
CHAP Local Name jsmart@bay.com
Dial Optimized Routing Enabled
Parameter Name Value
RFC1661 Compliance Enable