Filter
Top Products
Starting L2TP
303532-A Rev 00
2-5
Enabling L2TP on an Existing PPP Interface
To enable L2TP on an interface with PPP and IP already enabled, complete the
following tasks:
11. Click on
OK
.
12. Click on
Done
. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose a WAN connector.
The Edit Connector window opens.
2. Choose
Edit Circuit
. The Circuit Definition window opens.
3. Choose
Protocols
in the top left corner of
the window.
The Protocols menu opens.
4. Choose
Add/Delete
. The Select Protocols window opens.
5. Choose
L2TP
, then click on
OK
. The L2TP Configuration window opens.
6. Set the following parameters:
• RADIUS Primary Server IP Address
• RADIUS Primary Server Password
•
RADIUS Client IP Address
Click on
Help
or see the parameter
descriptions beginning on page A-5
.
7. Click on
OK
. The L2TP Tunneling Security window
opens.
8. Click on
OK
. The L2TP IP Interface List window opens,
followed by the L2TP IP Configuration
window.
(continued)
Site Manager Procedure
(continued)
You do this System responds