Filter
Top Products
L2TP Parameters
303532-A Rev 00
A-3
Parameter: Enable L2TP
Path: Configuration Manager > Protocols > IP > L2TP > L2TP Configuration
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables L2TP on this interface.
Instructions: Site Manager automatically sets this parameter to Enable when you select L2TP
as a protocol. Accept the default, Enable, to use L2TP. To temporarily disable
L2TP, set this parameter to Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.23.2.1.2
Parameter: Max L2TP Sessions
Path: Configuration Manager > Protocols > IP > L2TP > L2TP Configuration
Default: 100
Options: 1 to 100 sessions
Function: Specifies the maximum number of L2TP sessions that the LNS allows.
Instructions: Enter the maximum number of L2TP sessions that you want the LNS to support.
MIB Object ID: 1.3.6.1.4.1.18.3.5.23.2.1.16
Parameter: Receive Window Size
Path: Configuration Manager > Protocols > IP > L2TP > L2TP Configuration
Default: 4
Options: 1 to 7 packets
Function: Specifies the number of control packets that the LNS can receive from the LAC
without the LNS sending an acknowledgment packet to the LAC.
Instructions: Enter the number of packets that determine the window size, or accept the
default value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.23.2.1.6