Filter
Top Products
Configuring L2TP Services
2-10
303532-A Rev 00
If your ATM interface uses an ATM connector, complete the following tasks:
12. Click on
Done
. You return to the Circuit Definition
window.
13. Choose
File
. The File menu opens.
14. Choose
Exit
. You return to the Configuration Manager
window.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose an ATM connector.
The Edit ATM Connector window opens.
2. Choose
Service Attributes
. The ATM Service Records List window
opens.
3. Choose
Protocols
. The Protocols menu opens.
4. Choose
Add/Delete.
The Select Protocols window opens.
5. Choose
L2TP
, then click on
OK
. The L2TP Configuration window opens.
6. Complete steps 6
through 11 in the
previous table.
Site Manager enables L2TP.
7. Click on
Done
. You return to the ATM Service Records
List window.
8. Click on
Done
. You return to the Edit ATM Connector
window.
9. Click on
Done
. You return to the Configuration Manager
window.
Site Manager Procedure
(continued)
You do this System responds