Filter
Top Products
12
POST-PROCESS DATA
Post-processing requires collection of simultaneous data from the base and rover stations. This includes
accurate coordinates of the base station and accurate measurement of the IMU to antenna separation.
Collect the following data for post-processing:
• From the base station
• RANGECMPB ontime 1
• RAWEPHEMB onchanged
• GLOEPHEMERISB onchanged (if using GLONASS)
• From the rover station(s)
• RANGECMPB ontime 1
• RAWEPHEMB onchanged
• GLOEPHEMERISB onchanged (if using GLONASS)
• RAWIMUSXB onnew
• IMUTOANTOFFSETSB onchanged
• VEHICLEBODYROTATIONB onchanged
SPAN system output is compatible with Inertial Explorer
®
post-processing software from the Waypoint
®
Products Group, NovAtel Inc. Visit our website at www.novatel.com/products/software/
for details.
QUESTIONS OR COMMENTS
If you have any questions or comments regarding your SPAN system, contact NovAtel Customer Service
by:
Email: support@novatel.com
Web: www.novatel.com
Phone: 1-800-NOVATEL (U.S. & Canada)
1-800-668-2835
1-403-295-4500 (International)
Fax: 1-403-295-4501
NovAtel, SPAN, Inertial Explorer and Waypoint are registered trademarks of NovAtel Inc.
NovAtel Connect and OEM6 are trademarks of NovAtel Inc.
Windows is a registered trademark of Microsoft Corporation.
© Copyright 2013 NovAtel Inc. All rights reserved.
Printed in Canada on recycled paper. Recyclable.
Unpublished rights reserved under international copyright laws.