Filter
Top Products
6
INSTALL THE MIC IN A STANDALONE CONFIGURATION
In a standalone configuration, the MIC and OEM6 receiver are mounted separately.
Ref Connector Part Number Mating Connector Description
1
P101 43650-0313
(Molex)
43645-0300
(Molex)
Connects to the MIC power supply
(user supplied cable)
2
P601 53780-2070
(Molex)
51146-2000
(Molex)
Connects to HG1700, HG1900, HG1930 and
STIM300 IMUs (NovAtel supplied cable)
3
P701 53780-1070
(Molex)
51146-1000
(Molex)
Connects to ADIS IMUs
(NovAtel supplied cable)
4
P301 501571-3007
(Molex)
501189-3010
(Molex)
Connects the MIC serial port to the OEM6 receiver
(user supplied cable)
5 J301
ASP-163577-01
(Samtec)
N/A
This connector is not used in a standalone
configuration.
OEM628 Recommendations
• Use COM1 for connection to a computer. COM1 uses RS-232 levels and can be connected
to a computer without additional interface circuitry.
• Use COM2 for connection to the MIC serial port. Both the MIC serial port and COM2 use
LVTTL levels and can be connected without additional interface circuitry.
OEM638 Recommendations
• Use COM1 or COM2 for connection to a computer. COM1 and COM2 use RS-232 levels
and can be connected to a computer without additional interface circuitry.
• Use COM3 for connection to the MIC serial port. This COM port and the MIC serial port use
LVTTL levels and can be connected without additional interface circuitry.