Filter
Top Products
6/28/2007 page 106 of 145
Set Name of the Remote File
Command Name
ftp set remotefile
Description To set the name of the remote file which has to be retrieved from the
FTP server
Syntax ftp set remotefile <Remote-file-name>
Parameters
Remote-file-name
Name of the file to retrieved from the FTP server including the
complete path
Example eg.1
N-TRON/Admin#[1]> ftp set remotefile Flash
eg.2
N-TRON/Admin#[1]> ftp set remotefile /usr/local/ftp/flash
Notes The file name (including the complete path) should be a valid name else
retrieval of the file would fail.
Display FTP related configuration parameters
Command Name
ftp show
Description To display the present value of all the FTP related configuration
parameters
Syntax
ftp show
Parameters
None
Example
N-TRON/Admin#[1]> ftp show
Notes
Perform the configuration file transfer action
Command Name
ftp <get|put> config
Description To perform the desired File Transfer action (either get or put). Get
retrieves a remote file from the FTP server and put stores a local file at
the FTP server
Syntax
ftp get config
ftp put config
Parameters
Action-command
The desired File transfer action (either get or put)
Example eg.1
N-TRON/Admin#[1]> ftp get config
eg.2
N-TRON/Admin#[1]> ftp put config
Notes The action name should be either get or put
Perform the image file transfer action
Command Name
ftp get image
Description To perform the desired File Transfer action. Get retrieves a remote file
from the FTP server
Syntax
ftp get image
Parameters
None
Example
N-TRON/Admin#[1]> ftp get image
Notes Can only get an image from a server