N-Tron 7014FXE2 Switch User Manual


 
6/28/2007 page 133 of 145
Rapid Spanning Tree Protocol Related Commands
Set RSTP Admin Edge
Command Name
rstp set adminedge
Description Sets the Adminedge value of a port in a Vlan.
Syntax rstp set adminedge <vlan id> <port no> <status>
Parameters
vlan id
Vlan Id containing the port for which the adminedge is to be set.
port no
Port number in the Vlan to be set.
status
Status of the adminedge of the port to be set.
Values of “enable” and “disable” are valid
Examples
N-TRON/Admin#[1]> rstp set adminedge 1 1 disable
N-TRON/Admin#[2]> rstp set adminedge 2 2 enable
NOTES
Get RSTP Admin Edge
Command Name
rstp get adminedge
Description Gets the Adminedge value of the given port in the given Vlan-Id.
Syntax rstp get adminedge <vlan id> <port>
Parameters
vlan id
Vlan Id containing the port for which the adminedge is to be viewed .
port
Port for which the adminedge value is to be viewed .
Examples
N-TRON/Admin#[1]> rstp get adminedge 1 1
N-TRON/Admin#[2]> rstp get adminedge 2 2
NOTES
Set RSTP Auto Edge
Command Name
rstp set autoedge
Description Sets the Autoedge value of a port in a Vlan.
Syntax rstp set autoedge <vlan id> <port-no> <status>
Parameters
vlan id
Vlan Id containing the port for which the autoedge is to be set.
port-no
Port number in the Vlan to be set.
status
Status of the autoedge of the port to be set.
Values of “enable” and “disable” are valid
Examples
N-TRON/Admin#[1]> rstp set autoedge 1 1 disable
N-TRON/Admin#[2]> rstp set autoedge 2 2 enable
NOTES
Get RSTP Auto Edge
Command Name
rstp get autoedge
Description Gets the Autoedge value of the given port in the given Vlan-Id.
Syntax rstp get autoedge <vlan id > <port>
Parameters
vlan id
Vlan Id containing the port for which the autoedge is to be viewed .
port
Port for which the autoedge value is to be viewed .
Examples
N-TRON/Admin#[1]> rstp get autoedge 1 1
N-TRON/Admin#[2]> rstp get autoedge 2 2
NOTES