Filter
Top Products
6/28/2007 page 47 of 145
RSTP – RSTP Configuration
The RSTP Configuration tab under the RSTP category will display the RSTP information for the first
VLAN. Using the pull down menu at the top of the page an administrator can choose which VLAN to
configure RSTP on. Once the VLAN is selected the administrator may configure the bridge by clicking on
the Configuration button in the middle of the page.
The configuration screen for the VLAN that was previously selected will look like the example below. Here
the administrator can make changes such as the Hello Time, the Forward Delay, the Max Age, the priority,
and the Status of RSTP on that VLAN. Following the link for the view RSTP Port Configuration at VLAN#
the administrator or user can see the current RSTP status of the ports on that VLAN.
NOTE: Trunking must be disabled in order to use RSTP.