Filter
Top Products
6/28/2007 page 134 of 145
Set RSTP Bridge Admin Status
Command Name
rstp set bridgeadminstatus
Description Sets the Bridge Admin Status of the given Vlan-ID.
Syntax rstp set bridgeadminstatus <vlan id > <bridge adminstatus >
Parameters
vlan id
Vlan Id for which the priority to be set.
bridge adminstatus
Status of the Bridge to be set.
Values of “fast”, “forcestp” and “disable” are valid
Examples
N-TRON/Admin#[1]> rstp set bridgeadminstatus 1 disable
N-TRON/Admin#[2]> rstp set bridgeadminstatus 2 fast
NOTES
Get RSTP Bridge Admin Status
Command Name
rstp get bridgeadminstatus
Description Gets the Bridge Admin Status of the given Vlan-Id.
Syntax rstp get bridgeadminstatus <vlan-id >
Parameters
vlan-id
Vlan Id for which the admin status is to be viewed .
Examples
N-TRON/Admin#[1]> rstp get bridgeadminstatus 1
N-TRON/Admin#[2]> rstp get bridgeadminstatus 2
NOTES
Set RSTP Bridge Forward Delay
Command Name
rstp set bridgeforwarddelay
Description To set the forward delay time for a given Vlan-Id. Forward Delay in STP
is the time a switch waits after connecting to a root bridge, before he
changes the port state to forwarding from the listening and learning states.
RSTP only uses this as a backup feature for legacy STP device support.
Syntax rstp set bridgeforwarddelay <vlan-id > <forwarddelay >
Parameters
vlan-id
Vlan Id for which the forward delay time to be set.
forwardelay
Forward delay Time to be set. The valid range of the Forward delay
time is (4.0 – 30.0) secs.
Examples
N-TRON/Admin#[1]> rstp set bridgeforwarddelay 1 6
N-TRON/Admin#[2]> rstp set bridgeforwarddelay 2 10
NOTES Please ensure that the forwarddelay time and vlan id values are valid. STP
switches can take up to 2x this figure before both the root switch and the
STP switch changes the port modes into forwarding states.
Get RSTP Bridge Forward Delay
Command Name
rstp get bridgeforwarddelay
Description To get the Forward Delay Time of a given Vlan Id.
Syntax rstp get bridgeforwarddelay <vlan-id>
Parameters
vlan-id
Vlan Id for which the forward delay time is to be viewed.
Examples
N-TRON/Admin#[1]> rstp get bridge forwarddelay 1
N-TRON/Admin#[2]> rstp get bridge forwarddelay 2
NOTES Please supply a valid Vlan Index ( being greater than zero)