Filter
Top Products
13 - C110 User’s Guide
When cleaning the print head window
Hold down the Rotate Toner key for 5 seconds to 10 seconds.
The printer enters Print Head Cleanup mode.
Note For details on cleaning the print head window, refer to “Cleaning
the Print Head Window” on page 73.
Note To return to normal operation mode from Print Head Cleanup
mode, refer to “Cleaning the Print Head Window” on page 73.
Note Print Head Cleanup mode is a mode that allows the user to clean
the print head window more easily. The print head window is not
cleaned automatically.
When replacing all toner cartridges at the same time
Hold down the Rotate Toner key more than 10 seconds.
The printer enters Eject All Toner mode.
Note For details on replacing all toner cartridges at the same time, refer to
“Replacing All Toner Cartridges at the Same Time” on page 52.
Note To return to normal operation mode from Eject All Toner mode, press
the Clear key.
The Cancel KEY
The Cancel key allows you to:
" Continue a print job after addressing an error message
" Cancel a print job
" Reset the printer after a toner cartridge is replaced
Note For details on resetting the printer after replacing a toner cartridge,
refer to “Replacing a Toner Cartridge” on page 47.
Continuing a Print Job after an Error Message
You can continue a print job after correcting the following types of errors:
" No more media in the tray
" Media other than that set in the printer driver was fed into the printer
Note For details on the error messages, refer to “Indicator Messages” on
page 86.