Filter
Top Products
52 - C110 User’s Guide
11 Press in the toner cartridge until
it locks into place.
12 Close the front cover.
Note To replace the toner
cartridge for another
color, after the front cover
has been closed, check
that the indicator for the
toner to be replaced is lit
(if necessary, press the
Rotate Toner key), and
then replace the toner
cartridge as described in
steps 3 through 11.
13 Press the Cancel key to reset the printer and clear the indicator message.
Note The printer must complete a calibration cycle (less than 2 minutes)
after a toner cartridge has been replaced. If you open the top or
front cover before the printer is reset, the calibration stops, then
starts over again after the cover is closed.
Replacing All Toner Cartridges at the Same Time
CAUTION
Be careful not to spill toner while replacing a toner cartridge. If
toner spills, immediately wipe it off with a soft, dry cloth.