Filter
Top Products
2 – 32
(c) BOTTOM (Continuous sheet from bottom feeder) (option)
When the change lever is set in the BOTTOM position, the rotation of the platen
is transmitted to the drive gear of the bottom tractor feed unit through the idle gear
to feed the sheet which has been set in the bottom tractor feed.
At the same time, the switch lever turns on the bottom switch, to confirm to the control
board that you are in the continuous sheet mode.
Correlation in Mechanism
Mechanism
Lever
Position
Rear
Switch
Bottom
Switch
Idle
Gear
Change
Gear
Tractor
Gear
Sheet
Insertion
Manual/
automatic
CSF:
Operation SW
or instruction
•
•
Operation
SW
or
instruction
•
•
Operation
SW
or
instruction
TOP
REAR
BOTTOM
OFF
ON
OFF
OFF
OFF
ON
Rotate
Rotate
Rotate
Stop
Rotate
Rotate
Stop
Rotate
Stop