Filter
Top Products
14
OKICOLOR 8
|
Printing on Special Media
Important!
If you are printing transparencies, labels or card stock, you
must use the front tray and Special Media Stacker (rear
exit) to provide a straight-through path.
To set up the front tray:
1 Pull the front tray down.
2 Flip out the paper support, then swing out the paper
extender.
3 Adjust the paper guides for the print media you are using
and load the media.
• Load letterhead stationery face up, top edge feeding
into the printer
• Load transparencies with the strip face down, on the
edge feeding into the printer.