Oki 59296702 Printer User Manual


 
24
OKICOLOR 8
|
Replacing an Image Drum
When to Replace an Image Drum
CHG DRUM [color]
CHG DRUM displays and the corresponding color indicator
lights when the drum is near the end of its life, but still has
toner left. You can continue to use the drum until the toner
runs out. When this message appears, be sure you have a
replacement drum on hand.
CHANGE DRUM [color]
CHANGE DRUM displays and the corresponding color
indicator blinks when an image drum needs changing and the
toner is low. You can recover temporarily by opening and
closing the cover, but CHANGE DRUM will continue to
display after printing every 20 pages until a new drum is
installed.
How to Replace an Image Drum
Each image drum, toner cartridge, and slot in the printer has a
label marked with its corresponding color.
Caution!
Extended exposure to light can temporarily damage the
image drums. Do not open the printer until you are ready to
install the toner cartridge.
1 Turn the printer off and wait for the fuser to cool down.
Warning!
High temperature; allow at least 20 minutes for parts in
this area to cool before handling.
2 Press the OPEN button and lift the cover.