Filter
Top Products
|
Handy Reference 15
To setup the Special Media Stacker:
1 From the rear of the printer, pull the stacker down and
open the extender.
Media will feed to the rear, stacked face up.
Maximum capacity is 100 sheets of 20 lb paper.
Using the Front Tray
with Multiple Sheets
If you are going to use the front tray to feed a stack of print
media, you need to go into the menu and set the printer paper
input default to the front tray:
1 Press ON LINE.
Printer goes offline.
2 Press and release TRAY TYPE.
3 Press ENTER.
4 Press until FRONT TRAY appears on the display.
5 Press ENTER to select FRONT TRAY.
An asterisk appears to indicate the new default setting.
6 Press ON LINE to engage the setting and exit the menu.
!
When printing using the front tray, be sure to set your
software for front tray:
(1) Enter the printer setup menu on you computer.
(2) Select front tray or auto front feeder.
(3) Select the media type, size and orientation.