Filter
Top Products
|
Feature Set Guide: English 127
Windows NT DHCP Server Settings
This section will provides basic information on working with
Windows NT DHCP Servers.
For more information, refer to your Windows NT Server
manual and resource kit.
The settings listed below are required for the T.38 board to
work with a Windows NT DHCP Server.
· IP Addresses (IP Address Pool) must be leased
· Subnet Mask
· Default Gateway
· Fix (reserve) assigned addresses to the T.38 board.
IP Address Pool
· Set the Start Address and End Address for the IP
Addresses that can be leased
· Set the Start Address and End Address for the IP
Addresses that cannot be leased, if needed
Sub-net Mask
· Set the Subnet Mask that is valid for the IP Address
Pool
Default Gateway (Router)
· This is the DHCP option.
· Add 003 Router with the DHCP server that assigns an
IP Address to the T.38 board.
· Then, set the Default Gateway valid with the IP Address
Pool.
· Any other DHCP options are invalid.