Filter
Top Products
|
Feature Set Guide: English 129
Installation Process
As an installer, you will complete several steps.
· Physically install the T.38 facsimile machine
· Obtain a static IP Address for the T.38 facsimile
machine
· Program the IP Address, Subnet Mask, and Default
Gateway for the T.38 facsimile machine.
Do this using User Functions in the menu of the
facsimile machine.
· Install the T.38 software (including the IP Fax Console
Software) on a PC on the network the T.38 machine is
attached to
· Use the IP Fax Console Software to set up the Address
Table for the T.38 facsimile machine
· Provide the aliases for the IP Addresses (set up in the
Address Table) to the end user
Physical Installation
Physical Installation covers removing the facsimile machine
from its box, installing paper, physical connections, and
setup programming.
Refer to the User’s Guide, “Installation.”