Filter
Top Products
|
Feature Set Guide: English 69
Sending to a Non-Programmed E-mail
Also known as Numeric Keypad (Walk-up) e-mail faxing
If you want to send an Internet Fax, but you do not want to
program the e-mail address as a One-Touch, you must make
sure that it is sent as an Internet Transmission.
1 Load the document.
2 Press the e-mail key.
3 Input the e-mail address.
!
One-Touch Key 32 is the @ symbol.
Use One-Touch Key 31 (Caps) to switch between
upper and lowercase letters.
4 Press Start.
Limitations and Suggestions
· If you need a digital copy of a fax transmission for your
records, send the fax to the destination and your e-mail
address. Your e-mail address will receive a digital copy
(.TIFF format) of whatever you send.
· You cannot combine e-mail addresses and telephone
numbers in one fax transmission.
· If you select the same e-mail address twice, the document
will be sent to it only once.
· To stop transmission, press STOP.
The transmission terminates immediately, without asking
for confirmation.
· Internet Fax data is scanned into memory before
transmission. If the document is too long to fit into
memory, divide it and make two or more transmissions.
If you frequently divide documents, consider installing
additional memory.