Filter
Top Products
|
Feature Set Guide: English 143
Network Settings
List
The settings shown on the Network Settings Display and
Change Screens are:
Host Name
MAC Address
Use DHCP
IP Address
Default Gateway
Subnet Mask
TCP Port No. for receiving
TCP Port No. for Console
TCP Port No.
UDP Port No.
USE NAT
Global Address
Port No. Offset
TCP Handshake T.O. Value (Sec)
T38 Transmission Speed
Explanation
Host Name
The default setting is OKIFAX5950.
The host name may be up to 32 characters long.
You must use English, single byte characters.
MAC Address
Each device has a unique value that cannot be changed.
Use DHCP
The default setting is Use DHCP (DHCP is ON).
The box is checked.
Once a static IP Address has been assigned to the T.38
device, make sure that Use DHCP is OFF.
The box is not checked.
When DHCP is ON, you cannot change the settings for IP
Address, Default Gateway, or Subnet Mask.