Filter
Top Products
Network User’s Guide for C3400n and C3530 MFP
Windows - 20
C
ONFIGURING
W
INDOWS
TO
PRINT
TO
THE
NETWORK
PRINTER
Once you have configured the Network Card Setup utility you must configure
Windows to print to the network printer.
W
INDOWS
98/M
E
When printing using TCP/IP the Oki LPR utility use the following procedure:
1. When installing the driver, ensure it is installed as a local printer and
not a network printer.
2. Ensure the appropriate printer driver has been installed in Windows.
3. Install the Oki LPR utility as described on page 20 of this manual and
add the printer installed earlier.
W
INDOWS
NT 4.0
NOTE:
NT 4.0 requires administrator privileges.
With Windows NT 4.0, you have two options for printing using TCP/IP. They
are:
> Oki LPR
> Microsoft LPR
In order to use Microsoft LPR, it must first be installed into your operating
system.
Oki LPR
To install this port, the following needs to be carried out.
1. Select Start -> Control Panel -> Add Printer -> My Computer.
2. Click Next.
3. Select Add Port.
4. Select LPR Port and click OK.
5. Under “Name or address of server providing lpd” type the host name
or IP address of the host for the printer you are adding.
6. Under “Name of printer or print queue on that server” type the logical
printer name ‘lp’ and then click OK.
7. Follow the instructions on the screen to finish installing the LPR-
compatible printer.