Filter
Top Products
Network User’s Guide for C3400n and C3530 MFP
Windows - 23
W
INDOWS
XP
NOTE:
Windows XP requires administrator privileges.
With Windows XP, there are four options for printing using TCP/IP:
> Oki LPR
> Standard TCP/IP Port using:
•LPR
• Port 9100
Oki LPR
To install the Oki LPR port, see “Oki LPR” on page 20.
Standard TCP/IP Port using LPR or Port 9100
To install this port, proceed as follows:
1. Select Start -> Control Panel -> Printers and Faxes - Add a Printer.
2. Click Next.
3. Select “Local printer attached to this computer” and ensure that the
“Automatically detect and install my Plug and Play printer” check box
is not selected. Click Next.
4. Select “Create a New Port” and change “Type of Port:” to “Standard
TCP/IP Port”.
5. Click Next. The “Add Standard TCP/IP Printer Port Wizard” is
displayed.
6. Click Next and enter the host name or IP address for the printer, for
example, ‘192.168.1.31’. If the above IP address is entered, the Port
Name will default to IP_192.168.1.31.
7. Click Next. “Additional Port Information Required” is displayed.
8. Under “Device Type”, select Custom and click Settings.
9. Depending on whether you are installing the Windows Standard TCP/
IP Port using LPR or Port 9100, enter the following details:
LPR
> Set “Protocol” to LPR.
> Under “LPR Settings”, enter Queue Name: ‘lp’ and ensure that “SNMP
Status Enabled” is not selected.