Filter
Top Products
C8800 User’s Guide
233
Mac OS 9 / Classic
If you are using a source CMYK document, use the following
printer driver settings to perform a CMYK Ink Simulation:
1. Choose [File] → [Print].
2. From the [Printer] menu, select your printer model.
3. Select [Color Options].
4. From the [Color Mode] menu, select [Graphic Pro].
5. Select [Color – Graphic Pro 1].
6. From the [Color Matching Task] menu, select [ICC Profile
color Matching].
7. From the [CMYK Input Profile source], select the CMYK
Input profile that corresponds to the device you are
trying to match such as a SWOP or Euroscale Press. If
you have another CMYK Ink profile that you wish to use,
select it here as the appropriate “CMYK Source x” profile.
Remember that the names “CMYK Source 1”, “CMYK
Source 2” and so on relate to the number assigned to the
profile using Profile Assistant. See “Using Profile
Assistant” on page 222.
Use the [Preserve Black] option to keep the original gray
component (K channel) information. If [Preserve Black] is
disabled, the gray components may be printed using a
mixture of CMYK toner, instead of just K (black) toner.
8. Select [Color – Graphic Pro 2].
9. From the [Printer Output Profile] menu, select your
printer profile.
If [Auto] is selected, the factory default profiles that are
embedded in the printer will be used. If you have created
a printer profile yourself using profile creation software,
select it here and choose a rendering intent.