Filter
Top Products
ES3640e MFP Utilities Guide
Storage Device Manager • 164
Overlays
Windows PostScript
Printing
1. Open the file you want to print.
2. Click
File → Print.
3. Right-click the appropriate printer.
4. Your action depends on your operating system.
Windows XP: Click Preferences.
Windows 2000: Click Printing Preferences.
Win Me/98, NT: Click Properties.
5. Click the Job Options tab.
6. Click
Overlay...
7. To define an overlay, click
Define Overlays.
8. In the Overlay Name list, enter the file name of the overlay.
9. In ID Values, enter the ID of the file. Please refer to the
instructions for the Storage Device Manager utility.
10. Select the pages where the overlay prints. Use
Print on Pages
or
Custom Pages to select specific page numbers in the
document.
11. Click
Add.
12. Click
Close.
13. Repeat steps 8 though 12 for each overlay you wish to add.
14. Under
Defined Overlay, highlight the overlay name. Click the
Add button to add the overlay to the list in Active Overlays.
15. Select
Print Using Active Overlays.
16. Click
OK.
NOTE
The Overlay Name must be EXACTLY the same as the file
name you noted in the previous section. This is the name
under which the file is stored on the printer’s hard disk
drive. It is case sensitive.