Filter
Top Products
44
5 Text Display
Battery strength
Three-segment indicator.
• When all segments are lit, voltage level is greater than
8.0V.
• Two segments indicator a level of between 7.8V and
7.9V.
• One segment indicates a level of between 7.6V and
7.7V.
• When all segments are off (voltage level below 7.5 V,
printing is not possible.)
Signal strength
Three-segment indicator to indicate Minimum, Medium and
Maximum signal quality. An X indicates no reception.
Test Print indicator
Appears in Test Print mode.
Two-line text display
Displays the following:
• Various status messages: Firmware version, On-line
mode, Off-line mode, labels remaining in print queue, Test
Print status, Default Setting, Complete, Factory Clear,
Press Feed Key, Press Print Key, Hex Dump Mode, Set up
Display, Adjust LCD, Exit, Contrast, Back Light On
• Warning messages: Cover Open, Paper End, Sensor
Error, Buffer Near Full, Head Protect, Head Error, Module
Error,
T