Filter
Top Products
46
General Printing Procedure
After the proper setup and basic configuration procedures,
you are ready to print.
1. Make sure the host computer is ready to transmit data,
and ensure that the STATUS LED is lit. (Press the PRINT
button to take the printer ONLINE).
2. Start the print job from the computer.
3. When printing is finished, pinch either the left or right
corner of the printed roll of label(s) and tear it off in the
direction of the arrow in the diagram below.
Note: The number of sheets you can print is determined by
the printer’s mode (continuous or peel mode).
When you are printing non-separate labels and you
have torn the labels at a wrong place, stop the printing
and follow the instructions on the next page to correct
the print job.