Filter
Top Products
Configuring Your Machine > 39
Fax Setup
(cont.)
Default
Settings
(cont/)
MCF Report OFF, ON If enabled, the result of the
transmission will be printed out
each time.
Memory Tx OFF, ON This sets the transmission mode to
memory Tx (ON) or real-time Tx
(OFF).
F-Code Box
F-Code Box
Register/Edit Secure Box Secure Box: received data cannot
be printed without entering ID
code (for secret documents).
Use the numeric keypad to enter
the sub-address and ID code (note
enter a 4 digit ID code).
You can also enter a Box Name,
Password and specify the hold
time for your secure box.
Bulletin Box Bulletin Box: Enable to transmit/
receive documents to/from
Bulletin.
You can also enter a Box Name,
Password, enable Rx Protect, Auto
Print, OverWrite, Erase Tx Doc and
specify a four digit ID code.
Delete Select the box number to delete
and press Yes to confirm deletion.
If you are deleting a secure box
entry, enter the 4 digit ID code
and press Yes to confirm deletion.
Security
function
ID check Tx OFF, ON Check and match the last four
digits of the destination fax
numbers with those registered in
the target. If ON, the unit will send
only when they match.
Check broadcast
dest.
OFF, ON Fax number confirmation screen
displays before sending the fax.
Confirm Dial OFF, ON When ON, you will be asked to re-
enter the destination fax number.
The fax will only be sent when the
two numbers match.
Auto Print
Journal
Report
Setting OFF, ON Enable/disable auto print journal
report.
Print time OFF, ON When ON, enter the time using
the arrow keys or keypad.
The journal report will be printed
at the specified time every day.
Other
Settings
Redial Tries 00~02~15 Times Set the number of redial attempts.
Redial Interval 0~1~5 Min Set the time between redial
attempts.
FEATURE OPTION DESCRIPTION