Filter
Top Products
E-18 Pacemark 4410 Setup Guide
Connecting the Ethernet
®
Port
(for Pacemark 4410 with Print Server Pre-Installed)
The installed print server is EtherNet 10/100BaseT.
The Ethernet port requires a cable with two twisted-wire
pairs and an RJ45 plug for connection to the network. See
the OkiLAN 6100e User’s Manual included with your
printer for additional information.
1. Open the port access cover.
2. Plug one end of the short cable included with the printer into the
network board and the other end of the cable into the parallel port.